Add filters for auto milling that be adjusted by the user.

[Totalimus]

Hello,
I'm sure the current auto mill system will be adjusted since it isn't working as expected - doesn't always mill everything in one go but requires you to re-enter deck builder twice or more for all spares to get milled.
And while that is being done, I would like to suggest adding filters for auto milling, that can be adjusted by the user.
From my understanding, the milling system ensures that the user is left with two non premium versions of a bronze card and two premium versions, one non premium version of a gold card and one premium version of it respectively.
While that is a good thing for those who wish to have a truly full collection - all copies of both premiums and non premiums - I'm sure the majority would rather just keep the premiums and have the non premiums be milled (as long as the user is left with two copies of a bronze card in total) by the system, since currently it is a tiresome task to do by hand.
I believe it wouldn't be that hard to achieve since a similar filtration system already exists - when the user is in the deck builder, he may choose to have premium priority: "Display only premium if available, non-premium if there is no premium copy of the card".
Hopefully you will give this some thought.
Have a good day!

 

[TacticalGrizz7]

I agree, we need more control. Also, I would like to have the ability to not mill anything if I choose not too, that should be my choice. If we earned the cards we should be able to keep them if we want. Who cares if I have 15 of one card, it's not hurting anyone.

Maybe I'm wrong but with the new meteorite Powder economy coming I'd like to save my cards and mill them when I'd get the most profit from doing so, I feel like I'm getting jipped when it mills everything I have before the new economy is active.

 

[Draconifors]

I agree, we need more control. Also, I would like to have the ability to not mill anything if I choose not too, that should be my choice. If we earned the cards we should be able to keep them if we want. Who cares if I have 15 of one card, it's not hurting anyone.

Agreed.

And in general, more options is usually better when it comes to thing like collection management, so agreed with the OP as well.

 

[LeftHookGoodNight]

Well a year ago we had a button for milling and it was milling everything above 2 cards. And it was pretty useful. Why did you remove that amazing button. And gradually destroyed it for good and we now have ill conditioned auto mill button and it is only milling above 4 (even this is not functioning correctly) and i have to mill others between 2-4 afterwards . i am not even sure if you know what you are doing right now.

 

[xman145]

Agreed. Recently reached Pro Rank, wanted to reach higher MMR, but don't have many cards. Now i have to mill extra bronzes myself, which is really boring

 

[mazeebra]

And while that is being done, I would like to suggest adding filters for auto milling, that can be adjusted by the user.
From my understanding, the milling system ensures that the user is left with two non premium versions of a bronze card and two premium versions, one non premium version of a gold card and one premium version of it respectively.

Yeah, it would be nice. It should be in the options menu "collection management". Some people want both premium and non-premium cards, some people don't, some people don't care, and some people want to transmute extra copies of non-premium to premium, meaning they actually want to have more than the limit.

That makes about 4-5 different collection "types", and that should be reflected in the milling options.
I guess the maximum is:
- Keep non-premium card versions in collection && transmutable copies

Minimum is:
- Mill all card copies over 2 bronze and 1 gold

Then there are the inbetweens those..

 

[ThisIsSpartaPL]

On low account I need to search for cards I have more than 2 and mill them manually . I mill also some cards that I don't need in any deck and leave just one of them, so it's much work then. Making it manually without having button for this is very tiring and takes too much time instead of playing or building decks. On main account I have so many scraps that I don't need also to leave one extra gold card or 2 extra bronzes to make animated because I can always make them, so I don't know who benefits of this silly function to save 4 bronzes and 2 golds now.

 

[The_KassaK]

Its so boring this new system, what is the use of keeping 4 bronzes and 2 golds if we dont have premium ???

And if we have premium, what is the use of keeping non premium anyway ? We can only play 2 bronzes and 1 gold no ?

I want to be able to mill all my duplicates and keep only the premiums if I have them without having to do it by hand.

I could left the game for a stupid thing like this, no interest in wasting all this time doing it by hand.

 

[Thomas_Kristian_Ka]

Hey all, I'm new here.
When it comes to the milling I'm having some issues.
It tells me it is milling 3 gold cards for example, I press OK, but the scraps is still the same? Anyone else have this issue?

Am I missing something?

 

[The_KassaK]

Today I won 3000+ frags just by milling every duplicates by hands, with NO FUN at all : 3000 sleeping frags !!

I just keep 1 gold and 2 bronzes, priority to premium.

I don’t even want to open kegs anymore because I’m gonna have to do it again...

Does anyone know if CP is gonna do anything?

 

[Konanrtub]

Agree with all that is being said here. For me, it is Gwent's major flaw at this point. Auto-mill is broken, does not work at all for me (both PC and Android) and player milling on its own should be super easy. I would not even mind if you completely discard auto-mill mode, as long as player mill is intuitive, fast and easy, although of course that maintaining both modes is the ideal step forward.

Please fix this asap. I have like 22 scraps when I should currently have 50000 or so

Cheers!

 

[ZeDango]

Hello,
I'm sure the current auto mill system will be adjusted since it isn't working as expected - doesn't always mill everything in one go but requires you to re-enter deck builder twice or more for all spares to get milled.
And while that is being done, I would like to suggest adding filters for auto milling, that can be adjusted by the user.
From my understanding, the milling system ensures that the user is left with two non premium versions of a bronze card and two premium versions, one non premium version of a gold card and one premium version of it respectively.
While that is a good thing for those who wish to have a truly full collection - all copies of both premiums and non premiums - I'm sure the majority would rather just keep the premiums and have the non premiums be milled (as long as the user is left with two copies of a bronze card in total) by the system, since currently it is a tiresome task to do by hand.
I believe it wouldn't be that hard to achieve since a similar filtration system already exists - when the user is in the deck builder, he may choose to have premium priority: "Display only premium if available, non-premium if there is no premium copy of the card".
Hopefully you will give this some thought.
Have a good day!

Shiny card go BREEEEEEEEEEEEEEEEE


I wanna keep it
I am primitive