Building a gaming PC

+
Probably not so much. My experiences with cards with one and two fans (especially if the one fan is a reference design) show that two fan cards are often much quieter. Especially if you modify your fan profiles and keep a case with good air flow (and of course if you don't go overboard with your overclock :) ).
 
Then I might be getting one like that :) I don't plan to overclock, especially since it's already supposed to be clocked higher than the reference version.
 
This looks a bit weird:



Notice how the card is sticking out of the bracket (that attaches it to the case) by a lot. Is it normal?
 
Last edited:
It's looking like the RX 480 will appeal mostly to budget builds since it'll be slightly cheaper than the GTX 1060 but also has 15% less performance. We'll have to wait and see how this translates in actual game benchmarks though and the RX 480 may regain some of that 15% in DX12 games.

> We'll have to wait and see how this translates in actual game benchmarks <

Yes, that would be the best! Synthetic benchmarks are more or less useless as PC gaming concerns.
 
> We'll have to wait and see how this translates in actual game benchmarks <

Yes, that would be the best! Synthetic benchmarks are more or less useless as PC gaming concerns.

Especially since their benchmarks list is missing many comprehensive test suits, like Unigine Valley and etc. That's not how benchmarking should be done.
 
Especially since their benchmarks list is missing many comprehensive test suits, like Unigine Valley and etc. That's not how benchmarking should be done.

Yes a agree fully. Unigine engine would be the best, as it hammers the GPU badly! lol

---------- Updated at 01:32 PM ----------

This one: http://www.coolermaster.com/case/mid-tower/haf-xm/

It is rather big, so hopefully it wouldn't be a problem.

Well, form the specs of the case, you shouldn't have a problem, as on that case you can use a GPU with a length of max. 34.5cm

So i don't know what GPU you wanna buy, but even a GTX 1080 would fit in there with plenty of space to spare.

---------- Updated at 02:00 PM ----------

It seems that the GTX 1060 will start at 250$ going up to the 300$ mark for the founders edition!
Link in question: http://www.anandtech.com/show/10474/nvidia-announces-geforce-gtx-1060-july-19
 
Apparently the GTX 1060 has 6 GB RAM, MSRP of $250 ($300 for the reference Founder's Edition), single 6 pin connector on reference design, 120 watt power draw and outperforms the GTX 980 (this last part was stated during their launch presentation). Nvidia is also claiming it outperforms the RX 480 in games by an average of 15%:

https://www.youtube.com/watch?v=k79V1-VQGOQ
 
Last edited:
Apparently the GTX 1060 has 6 GB RAM, MSRP of $250 ($300 for the reference Founder's Edition), single 6 pin connector on reference design, 120 watt power draw and outperforms the GTX 980 (this last part was stated during their launch presentation). Nvidia is also claiming it outperforms the RX 480 in games by an average of 15%:

https://www.youtube.com/watch?v=k79V1-VQGOQ
It will most likely be level with the 980, as leaked 3dmark results indicate.
Also it seems Nvidia drops SLI support on its performance/mainstream cards - no SLI-connector on the 1060.
 
From what I red from AMD engineers, the industry plans to get rid of SLI / Crossfire methodology altogether in the future. Multi-GPU will be handled on application level through direct APIs like Vulkan. Which makes perfect sense actually.

No such connectors is probably a sign of this change already.
 
Nvidia pushed a new kind of connector with the Pascal, but AMD got rid of them yeah. Data transfer through PCI Express seems much more sensible to me as well, at least on the in-case clutter side :)
 
Top Bottom