GTX 295 - Strange Glare-See Through Graphical Problem, (Can't use Nhancer)
Greetings Everyone, Before I get flamed for not searching the forums and doing my own research, just note that I did.Basically, I have the common problem people have experienced with the Witcher, as I get this annoying "see-through" of the torches, light, etc.. through the characters, and at night I get this strange yellow glare as I run around in OTS mode when I move my camera around.. Now from what I found, there's two ways to fix this, disable SLI, or in my case disable my 2nd GPU, since the GTX 295 has 2 GPUs.. So I did that, and now it works no problems (Though noticing slightly longer loading times now, which is annoying).. However, others have suggested to use a program called "Nhancer" and this way at least I can have both my GPUs running and avoid that problem all together too. Here lies the problem though, Nhancer won't start.. I see the Logo Screen, and after nothing pops up, no errors, nothing.. So upon further searching I found this is a known problem with Nvidia drivers now in the 2xx driver series.. (I believe I'm using the last official drivers (Using the 266.58 drivers, as the 170 beta drivers I had were not working good for me when playing Shogun 2, so reverted back).. So others have said to instead try "Nvidia Inspector" which supposedly does the same stuff as Nhancer from what I've read.. So the question I have, is what kind of Profile do I need to use with "Nvidia Inspector" so at least I have both my GPUs working The Witcher?If anyone is curious on the rest of my specs if it helps for some reason: Intel Core i7 - 96512 Gigs of Ram GTX 295 Win 7 - 64 Bitthanks everyone,
Greetings Everyone, Before I get flamed for not searching the forums and doing my own research, just note that I did.Basically, I have the common problem people have experienced with the Witcher, as I get this annoying "see-through" of the torches, light, etc.. through the characters, and at night I get this strange yellow glare as I run around in OTS mode when I move my camera around.. Now from what I found, there's two ways to fix this, disable SLI, or in my case disable my 2nd GPU, since the GTX 295 has 2 GPUs.. So I did that, and now it works no problems (Though noticing slightly longer loading times now, which is annoying).. However, others have suggested to use a program called "Nhancer" and this way at least I can have both my GPUs running and avoid that problem all together too. Here lies the problem though, Nhancer won't start.. I see the Logo Screen, and after nothing pops up, no errors, nothing.. So upon further searching I found this is a known problem with Nvidia drivers now in the 2xx driver series.. (I believe I'm using the last official drivers (Using the 266.58 drivers, as the 170 beta drivers I had were not working good for me when playing Shogun 2, so reverted back).. So others have said to instead try "Nvidia Inspector" which supposedly does the same stuff as Nhancer from what I've read.. So the question I have, is what kind of Profile do I need to use with "Nvidia Inspector" so at least I have both my GPUs working The Witcher?If anyone is curious on the rest of my specs if it helps for some reason: Intel Core i7 - 96512 Gigs of Ram GTX 295 Win 7 - 64 Bitthanks everyone,
