[WEAPON] MILITECH M-10SF "Special Forces" Variant

+


Militech_Logotype_Yellow.png

CYBERPUNK 2077 SIGNATURE.png




MANUFACTURER: MILITECH
MODEL: M-10SF "SPECIAL FORCES"

FRAME: TITANIUM & POLYCARBON
BARREL: TITANIUM, TUNGSTEN DISSULFIDE COATED
SIGHTS: NANOCELL LIT IRON SIGHTS
CAPACITY: 20+1 or 30+1
FIRE CONTROL: 3 RD BURST FIRE
AMMUNITION: SELECT - MUNITION - ACTIVATION - REALTIME - TARGETING (S.M.A.R.T.)*
DPS: 500 (950 - 1000 @ lvl 50, MOD dependent)
DMG: 190-200 (300-310 @ lvl 50)

==========================================================

MODS:

BARREL - SUPPRESSOR or COMPENSATOR (Recoil reduction by 10%)
OPTICS - All in-game pistol optics
MAGAZINE - A special perk selection for the Legendary variant. You get a 30 RD
magazine but cannot equip a suppressor or compensator.

COLORS:

Burnt Bronze Forward Receiver, Coyote Brown Lower Polymer Frame
& Sight Housings and Satin Arum Barrel, Furniture and Bolt ASSY.

CRAFT SPEC GUNS are always Black with OD Green Lower Receiver's.
While Iconic M-10SF's are colored as described above.

==========================================================

MOD AMPLIFIER SLOTS: 2 (EPIC), 3 (LEGENDARY).

COST: $200,000 / $250,000 for Craft Spec. Requires an Epic or Legendary M-10AF.

RARITY: EPIC and LEGENDARY.

DROPS: MILITECH AGENTS, DRONES, BASES and RANDOM HIDDEN LOCATIONS.

===========================================================

ADDITIONAL INFORMATION

*Ammunition can be activated as Electric, Thermal, Chemical, or
Traditional Ball (un-activated) depending on what scan information
comes back from enemies.

If the enemy is not scanned; it will fire a combat mix of Electric / Thermal / Chemical
(one of each round per trigger pull). This gun requires the Smart Targeting Cyberware
however does not auto target enemies. It is required for the munition
activation type.

The rounds are 10mm Tungsten Sabot shells. Inside each shell is a Military Grade capacitor.
New requirements by Militech Operations Command called for a more robust and accurate
pistol. Most fighting rarely revolves around continuous fire. So, thus this prototype was born
from the M-10AF Pistol with some heavy improvements that are all internal.

There only 20 known examples to have existed. The crafting specs for automated manufacturing are said
to have been taken to the Badlands by a rogue Militech agent looking to score cash. It may have even
made it's way into NC at a fire arms dealer that may not part with it so easy.

The Electric Round is activated by the firearms battery and worn Cyberware. It charges
the round before firing. The White Phosphor inside burns away the retaining ring
for the bullet tip thereby sending only that part of the round flying (Empty Sabot with charged tip).
The rest of the the round acts as bonus physical secondary damage of 5 DPS.

The Thermal Round is activated by the electric round. An inner magnetic set of rings
are set at like poles. The capacitor fires and dissipates the charge before hitting the
target by removing the magnetic locking rings exposing the ignited White Phosphor pellet tip.

The Chemical Round is activated by the previous two activations. They essentially make a small
barrel in the bullet prior to entry into an enemy target. Kinetic Impact energy sends a small highly
toxic dart through the hole and into the assailant.

This is all accomplished by a tri-striker that strikes one, two or all three primers that are in a triangular formation on the cap.
 
Last edited:
I really like it!

I had a similar idea for damage type ammo, with a weapon mod that sits in the barrel and
physical - cuts predetermined breaking points into the bullet
electrical - inductively charges the bullet
thermal - inductively 'melts' the bullet/ heats it up until it ignites the powder
chemical - sprays neurotoxin onto the bullet
all use standard bullets and degrade the mod which needs replacing

I find your approach to be much more in depth and intriguing however!
I am quite sure i don't imagine it correctly tho, how close is this?
0TriRound.jpg
 
Close, I will draw up a sketch for myself to model in SolidWorks and then Render in KeyShot. I finally for a large enough image of the M-10AFthat has all required Orthographic views. My bullet shape is more like a Tank round Sabot.
 

ya1

Forum regular
You forgot the most important piece of information.

NUMBER OF SHOTS REQUIRED TO KILL EVERY SINGLE ENEMY IN THE GAME: 1
 
Close, I will draw up a sketch for myself to model in SolidWorks and then Render in KeyShot. I finally for a large enough image of the M-10AFthat has all required Orthographic views. My bullet shape is more like a Tank round Sabot.
Very cool, looking forward to that!

I intended to do the same, except for keyshot

What's the rate of fire for this gun?
And with a tri-striker, can the bolt with the strikers automatically turn or would the rounds be aligned somehow?
 
Last edited:
Outstanding OP, almost erotic! :sneaky::ROFLMAO: and it's got me singing Finland Red Egypt White, a sensitive and similar little ditty by The Sisterhood (y)
 
Top Bottom